This amplifier features ECC88 dual triode valve input circuits coupled with low output impedance driver stages to drive up to two pairs of headphones. A USB input is also provided for listening to computer-based music collections. It can also be used as a valve preamplifier with volume control through the pre-outputs. The X-CAN V8P is a perfect answer to most headphone amplifier requirements in a single, beautifully engineered package. Used properly and carefully, it should give many years of outstanding musical reproduction. Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.
Output: Power 1.3 Watts per channel into 32 Ohms
Output devices 2 per channel
Output impedance 2 Ohms
Line input: THD + N <0.008% typical 20Hz to 20 kHz
Signal / noise ratio >100dB unweighted
>109dB ‘A’ weighted
Input impedance 22 k Ohms
Frequency response 20Hz to 70 kHz, +0, -1dB
Connections: Line level inputs: 1 pair line level RCA connectors,
Line level outputs: 1 pair RCA loop outputs [constant level]
Line level outputs: 1 pair RCA pre-outputs [level controlled by volume]
Digital inputs: 1 USB 1.1 [32, 44.1, 48 kHz sample rates] connection for
computer only
Power
requirement:
12-0-12V (24V
total) AC at 500mA
Using mains adaptor (supplied)
Standard
accessories:
Power Supply Unit T48A-24-500-3 1 off
Dimensions: Main unit
180mm 7 inches Wide
88mm 3 ½ inches High including feet
240mm 9 ½ inches Deep including terminals
Weight: 1.85 kg, 4 ¼ lbs Unboxed
2.5 kg 5 ½ lbs Boxed unit including power supply and all accessories
< Back |
